ELTRA CS-d
(Please order PC, monitor, balance and consumables (starter-kit, anhydrone, sodium hydroxide, Pt/Si catalyst) separately)
Measuring ranges at 1000 mg sample weight (induction furnace) || 350 mg sample weight (resistance furnace)
induction furnace || resistance furnace
88200-1211
CS-d
2xC
0.0001 – 7 % C
||
0.004 – 62.8 % C
88200-1212
CS-d
2xS
0.00006 – 2.3 % S
||
0.001 – 31.4 % S
88200-1233
CS-d
2xC
0.0001 – 7 % C
||
0.004 – 62.8 % C
2xS
0.00006 – 2.3 % S
||
0.001 – 31.4 % S
Every configuration can be equipped with an autoloader for the induction furnace.
No special “autoloader ready” configuration has to be purchased.
Required accessories
PC, Monitor, Balance
71015-1000
Computer with Intel Core i5-8400 Processor, 256 GB SSD; 8 GB RAM; Windows 10 operating system; keyboard; mouse
88400-0584
Monitor, TFT (23.8")
88400-0645
Balance (resolution 0.0001 g)
Required consumables / chemicals for first operations
88500-0002
Starter-kit for 1,000 analyses
(500 crucibles, 2,500 g tungsten, 908 g pure iron accelerator, 50 g glass wool, 50 g cellulose, 50 g quartz wool, 50 re-usable boats, 500 disposable porcelain boats, 100 g Combsolid)
90200
Anhydrone (magnesium perchlorate), 454 g
90210
Sodium hydroxide, 500 g
88400-0535
Pt/Si catalyst,15 g
88600-0021
Copper oxide wire (0.5*2 mm), 100 g (could be used alternatively to Pt/Si catalyst)
Further options and consumables
Accessories (Hardware)
88200-9000
Carrier gas purification furnace, without filling (please order filling and quartz wool separately)
88400-0122
Filling for carrier gas purification furnace (CS)
88400-0610
Barcode scanner
88200-3800
TIC-Module
88200-1400
Autoloader (36 positions) for induction furnace
88200-1500
Autoloader (130 positions) for induction furnace
88600-0018
CS-i vacuum cleaner (with HEPA filter)
88600-0020
Halogen trap CS-i / CS-d
Crucibles and lids for the combustion furnace
90149
Ceramic crucibles, premium, Ø 1”,
foil-wrapped, 1,000 pieces
90148
Ceramic crucibles, premium, Ø 1”,
88400-0176
Ceramic filtering crucibles, 100 pieces
88600-0014
Ceramic lids, 10 mm hole, 250 pieces
88600-0017
Ceramic lids, 4 mm hole, 1000 pieces
Boats for the resistance furnace
90153
Re-usable ceramic boats, premium, 58x22x14 mm, 500 pieces
90160
Disposable porcelain boats, 86 x 13 x 10 mm, 1000 pieces
88600-0011
Re-usable ceramic boats, 95 x 13 x 10 mm, 500 pieces
88400-0502
Re-usable inconel boat, 54 x 18 x 13.5 mm, 1 piece
88400-0503
Re-usable inconel boat, 54 x 18 x 9 mm, 1 piece
Accelerators for the induction furnace
90220
Tungsten, premium, 2,500 g
90260
Iron accelerator, premium, 908 g
88600-0013
Iron accelerator, high purity, 454 g
88600-0010
Eltracell tungsten-tin accelerator, 750 g
90280
Tin accelerator, 908 g
90240
Copper accelerator, 1392 g
Combustion support for the resistance furnace
90840
Quartz sand, 100 g
88600-0008
Combsolid, 100 g
Chemicals
90200
Anhydrone (magnesium perchlorate), 454 g
90210
Sodium hydroxide, 500 g
88400-0535
Pt/Si catalyst, 15 g
90331
Glass wool, 454 g
90340
Cellulose, 100 g
90341
Cellulose, 50 g
90330
Quartz wool, 50 g
92610
Tube of high vacuum grease, 35 g
88400-0122
Filling for carrier gas purification furnace
91000-1005
Copper, flakes, 25 g
88400-0508
Steel wool, 454 g
88600-0021
Copper oxide wire (0.5*2 mm), 100 g (could be used alternatively to Pt/Si catalyst)
General tools and accessories
23110
Spatula, 1 piece, M size
23111
Spatula, 1 piece, L size
23113
Spoon, 1 piece, for dosing sample and accelerator in CS series
90145
Tongs for ceramic crucibles and boats, 220 mm 1 piece
88400-0229
Tweezers (160 mm), curved, 1 piece
88400-0472
Tweezers (145 mm), straight, 1 piece
88400-0475
Set with 6 spatula and 1 tweezers for multiple weighing procedures
88400-0476
Micro spatula, 1 piece, XS size, for filling small capsules
Tools for storage, transporting and weighing
36121
Quartz boat, 74 x 22 x 10 mm, 1 piece, for weighing pins
71010
Brush, 16 mm, 1 piece, for cleaning balance from dust
88400-0477
Weighing boat, 1 piece, for weighing and usage of granulates
88600-0015
Crucible holder, for storage of crucibles
Tools for maintenance
51200-8000
Maintenance kit CS-d
88400-0473
Powder funnel (plastics), 1 piece, for easy filling of chemical tubes
88400-0489
Rubber plug 14 x 20 x 24 mm, 1 piece, for sealing small glass tubes like 88400-0006
88400-0490
Rubber plug 29 x 35 x 30 mm, 1 piece, for sealing big glass tubes like 09090
88600-0026
Anhydrone filter tube
88600-0027
Sodium hydroxide, Anhydrone filter tube
Tools for CS analyzers
36216-2001
Combustion boat insertion stick, 1 piece (only for CS-d)
36218-2001
Combustion boat removing stick, 1 piece (only for CS-d)
88400-0332
Threaded rod M4x150, 1 piece, for removing paper filter holder
88400-0499
Safety glasses, 1 piece, protection when working with hot furnace
88600-0009
Screen glass with edge guard, 1 piece, protection when working with hot furnace
Calibration materials
Calibration materials may show slight variations depending on the current lot.
To see the current certification please visit www.ELTRA.com.
Steel and cast iron
92400-3020
Steel, 150 g, 0.001 – 0.01 % C
92400-3030
Steel, 150 g, 0.01 – 0.05 % C
92400-3050
Steel, 150 g, 0.1 – 0.2 % C
92400-3060
Steel, 150 g, 0.2 – 0.5 % C
92400-3061
Steel, 150 g, 0.2 – 0.5 % C
92400-3062
Steel, 150 g, 0.2 – 0.5 % C
92400-3070
Steel, 150 g, 0.5 – 1.0 % C
92400-3090
Cast iron, 150 g, 2.0 – 3.0 % C
92400-3091
Cast iron, 150 g, 2.0 – 3.0 % C
92400-3100
Cast iron, 150 g, 3.0 – 5.0 % C
92400-3101
Cast iron, 150 g, 3.0 – 5.0 % C
92400-3102
Cast iron, 150 g, 3.0 – 5.0 % C
92400-4005
Steel, 150 g, ~0.05 % S
92400-4010
Steel, 150 g, ~0.1 % S
92400-4020
Steel, 150 g, ~3 % S
Steel pins
92500-1001
C/S pins, 454 g, ~0.2 %~C
92500-1002
C/S pins, 454 g, ~0.4 %~C
92500-1003
C/S pins, 454 g, ~0.8 %~C
92500-2001
C/S pins, 454 g, ~0.2 % S
Tungsten carbide
90816-3001
Tungsten carbide, 100 g, ~6,1 % C
Other calibration material suitable for resistance and induction furnace
90812-3001
Limestone, 25 g, 0.04 % S
90812-3002
Limestone, 25 g, 0.4 % S
90812-3003
Limestone, 25 g, < 5 % C
90812-3004
Limestone, 25 g, 5 – 10 % C
90817-3001
Soil, 25 g, > 2 % C, S
90817-3002
Soil, 25 g, < 1 % C, S
90817-3003
Soil, 25 g, > 2 % C, S
90817-3004
Soil, 25 g, < 2 % C, < 1 % S
91900-1001
Ore, 30 g, ~1.4 % S
91900-1002
Ore, 30 g, ~4.2 % S
91900-1003
Ore, 30 g, ~3 % S
91900-2001
Zinc sulfide, 50 g, 32 % S
90810
Calcium carbonate, 100 g
90821
Barium sulphate, 50 g
Other calibration material only suitable for resistance furnace
90710-3010
EDTA, 50 g
90824
Sulfanilic acid, 50 g
92511-3005
Coal, 50 g, < 0.1 % S
92511-3010
Coal, 50 g, 0.1 – 0.5 % S
92511-3020
Coal, 50 g, 0.5 – 1.0 % S
92511-3030
Coal, 50 g, 1.0 – 1.5 % S
92511-3040
Coal, 50 g, 1.5 – 2.0 % S
92511-3050
Coal, 50 g, 2.0 – 3.0 % S
92511-3060
Coal, 50 g, 3.0 – 4.0 % S
92511-3070
Coal, 50 g, 4.0 – 5.0 % S
92511-3080
Coal, 50 g, >5.0 % S
Coal, premium, C/H/N/S, ash, volatile content, certified
92550-3010
Coal, premium, 50 g, < 1.0 % S
92550-3020
Coal, premium, 50 g, ~ 1 % S
92550-3040
Coal, premium, 50 g, 1.0 – 3.0 % S
92550-3060
Coal, premium, 50 g, > 3.0 % S
Coke, premium, C/H/N/S, ash, volatile content, certified
92560-3010
Coke, premium, 50 g
Pet coke, premium, C/H/N/S, ash, volatile content certified
92570-3020
Pet coke, premium, 50 g, ~ 1 % S
92570-3040
Pet coke, premium, 50 g, ~ 1 % S
Spare and wear parts ELTRA CS-d
