General chemicals, wools and fillings
General chemicals, wools and fillings
90200
Ангидрон (перхлорат магния), 454 г
90210
Гидроксид натрия, 500 г
90270
Реактив Шутца, 100 г
90289
Оксид меди II, 100 г
88400-0535
Pt/Si catalyst, 15 g
90331
Стекловата, 454 г
90332
Стекловата, 50 г
90340
Целлюлоза, 50 г
90341
Целлюлоза, 50 г
90330
Кварцевая вата, 50 г
92610
Tube of high vacuum grease, 35 g
88400-0122
Filling for carrier gas purification furnace (optional for CS analyzers)
90426-1001
Filling for carrier gas purification furnace (optional for ONH analyzers)
91000-1005
Медь, стружка, 25 г
88400-0508
Steel wool, 454 g
90234
Filling for halogen trap, potasium iodide
90235
Filling for halogen trap, antimony
88600-0021
Copper oxide wire (0.5*2 mm), 100 g (could be used alternatively to Pt/Si catalyst)
88400-0640
Copper turnings
88400-0635
Furnace Reagent
Accelerators for the induction furnace
90220
Вольфрам, 2,500 г
90260
Акселератор Железо, 908 г
88600-0013
Акселератор железо высокой чистоты, 454 г
88600-0010
Eltracell tungsten-tin accelerator, 750 g
90280
Акселератор олово, 908 г
90240
Акселератор медь, 1392 г
Combustion support for the resistance furnace
90840
Кварцевый песок, 100 г
88600-0008
Акселератор Combsolid, 100 г
General tools and accessories
23110
Spatula, 1 piece, M size
23111
Spatula, 1 piece, L size
23113
Spoon, 1 piece, for dosing sample and accelerator in CS series
90145
Tongs for ceramic crucibles and boats, 220 mm 1 piece, for CS series
88400-0213
Tongs for graphite crucibles, 1 piece, for ONH series
88400-0229
Пинцет (160 мм), скругленый, 1 штука
88400-0472
Пинцет (145 мм), прямой, 1 штука
88400-0475
Set with 6 spatula and 1 tweezers, for multiple weighing procedures
88400-0476
Micro spatula, 1 piece, XS size, for filling small capsules
Tools for storage, transporting and weighing
36121
Quartz boat, 1 piece, 74 x 22 x 10 mm, 1 piece, for weighing pins
71010
Brush, 16 mm, 1 piece, for cleaning balance from dust
88400-0477
Weighing boat, 1 piece, for weighing and usage of granulates
88600-0015
Подставка тигля, for storage of crucibles
90146
Steel pot for preheated crucibles and used crucibles
90179
Vacuum pipettes 150 x 3.5 mm, for sampling molten steel, 1000 pieces
Tools for maintenance
88400-0473
Powder funnel (plastics), 1 piece, for easy filling of chemical tubes
88400-0489
Rubber plug 14 x 20 x 24 mm, 1 piece, for sealing small glass tubes like 88400-0006
88400-0490
Rubber plug 29 x 35 x 30 mm, 1 piece, for sealing big glass tubes like 09090
71010
Brush, 16 mm, 1 piece, for cleaning balance from dust
88400-0332
Threaded rod M4x150, 1 piece, for removing paper filter holder
88400-0500
Telescope mirror, 1 piece, for inspection of upper electrode of ONH-p/ONH-2000
71032
Composite brush, 1 piece, for cleaning upper electrode of ONH-p furnace
71035
Cleaning brush / furnace brush, 1 piece, for cleaning sample inlet of ONH furnaces
71031
Metal brush, 1 piece, for cleaning graphite tip and its holder
88400-0504
Cylinder brush, brass, for intensive cleaning of lower furnace
88400-0501
Micro brush, 1 piece, for cleaning of ONH series furnace outlet tube
Consumables for ELTRA CS, CHS and special analyzers
Crucibles and lids for the combustion furnace
90149
Керамические тигли, премиум Ø 1”, завернуты в фольгу, 1,000 штук
90148
Керамические тигли, премиум Ø 1”, упакованы в пакеты, 1,000 штук
88400-0176
Керамические фильтрующие тигли, 100 штук
88400-0142
Ceramic filtering crucibles, small version, 100 pieces
88600-0014
Ceramic lids, 10 mm hole, 250 pieces
88600-0017
Ceramic lids, 4 mm hole, 1000 pieces
26063
Ceramic crucibles for TGA
26053
Ceramic lid for TGA
Boats for the resistance furnace
90153
Re-usable ceramic boats, premium, 58 x 22 x 14 mm, 500 pieces
90160
Disposable porcelain boats, 86 x 13 x 10 mm, 1,000 pieces
88600-0011
Re-usable ceramic boats, 95 x 13 x 10 mm, 500 pieces
88400-0502
Re-usable inconel boat, 54 x 18 x 13.5 mm, 1 piece
88400-0503
Re-usable inconel boat, 54 x 18 x 9 mm, 1 piece
36120
Quartz boat, 75 x 16 x 7.5 mm, 1 piece
36121
Quartz boat, 74 x 22 x 10 mm, 1 piece
46160
Combustion boat SurfaceC-800
Tools
36216
Combustion boat insertion stick, 1 piece (not suitable for CS-d)
36217
Combustion boat removing stick, 380 mm, 1 piece (not suitable for CS-d)
36216-2001
Combustion boat insertion stick, 1 piece (only for CS-d)
36218-2001
Combustion boat removing stick, 1 piece (only for CS-d)
88400-0499
Safety glasses, 1 piece protection when working with hot furnace
88600-0009
Screen glass with edge guard, 1 piece protection when working with hot furnace
Consumables & tools for CN-r
88400-0637
Ash container for CN-r furnace
88400-0474
Tin foils, small for application of samples
Consumables for ELTRA ONH analyzers
Capsules, foils and fluxes for ONH analysis
90257
Никелевая капсула, 3.2x7 мм, 100 штук
90256
Nickel capsules, 4.5 x 10 mm, 250 pieces
88400-0066
Nickel capsules, pressed, 12.5 x 5 mm, 100 pieces
90252
Tin capsules, 5 x 18 mm, 100 pieces
88400-0474
Tin foil, 36x36 mm, cup form, 200 pieces
Baskets (required for oxygen and nitrogen determination in refractories)
90250
Никелевая корзинка, 1 г, 100 штук
88600-0012
Nickel baskets, high purity (low oxygen),
Fluxes (required for some applications)
90251
Tin pellets, 454 g (for determination of hydrogen in titanium)
90800
Graphite, 50 g (improves oxygen determination)
90258
Nickel accelerator, 100 g (for analysis of high amount of refractories)
Crucibles
88400-0471
Graphite crucibles, 400 pieces (recommended for autoloader operation)
90190
Graphite crucibles, 400 pieces (for copper, brass and steel analysis)
90180
Inner graphite crucibles, 100 pieces (requires outer graphite crucible 90185)
90185
Внешний графитовый тигель, 50 штук
Calibration material for induction furnaces
Steel / Cast Iron
92400-3020
Steel, 150 g, 0.001 – 0.01 % C
92400-3030
Steel, 150 g, 0.01 – 0.05 % C
92400-3050
Steel, 150 g, 0.1 – 0.2 % C
92400-3060
Steel, 150 g, 0.2 – 0.5 % C
92400-3061
Steel, 150 g, 0.2 – 0.5 % C
92400-3062
Steel, 150 g, 0.2 – 0.5 % C
92400-3070
Steel, 150 g, 0.5 – 1.0 % C
92400-3090
Cast iron, 150 g, 2.0 – 3.0 % C
92400-3091
Cast iron, 150 g, 2.0 – 3.0 % C
92400-3100
Cast iron, 150 g, 3.0 – 5.0 % C
92400-3101
Cast iron, 150 g, 3.0 – 5.0 % C
92400-3102
Cast iron, 150 g, 3.0 – 5.0 % C
92400-4005
Steel, 150 g, ~0.05 % S
92400-4010
Steel, 150 g, ~0.1 % S
92400-4020
Steel, 150 g, ~3 % S
Steel pins; nominal weight 1 g
92500-1001
C/S pins, 454 g, ~0.2 %~C
92500-1002
C/S pins, 454 g, ~0.4 %~C
92500-1003
C/S pins, 454 g, ~0.8 %~C
92500-2001
C/S pins, 454 g, ~0.2 % S
Tungsten carbide
90816-3001
Карбид вольфрама, 100 г, ~6.1 % C
Other calibration material suitable for resistance and induction furnace
90812-3001
Известняк, 25 г, 0.04 % S
90812-3002
Известняк, 25 г, 0.4 % S
90812-3003
Известняк, 25 г, < 5 % C
90812-3004
Известняк, 25 г, 5 – 10 % C
90817-3001
Soil, 25 g, > 2 % C, S
90817-3002
Soil, 25 g, < 1 % C, S
90817-3003
Soil, 25 g, > 2 % C, S
90817-3004
Soil, 25 g, < 2 % C, < 1 % S
91900-1001
Руда, 30 г, ~1.4 % S
91900-1002
Руда, 30 г, ~4.2 % S
91900-1003
Руда, 30 г, ~3 % S
91900-2001
Zinc sulfide, 50 g, 32 % S
90810
Карбонат кальция, 100 г
90821
Сульфат бария, 50 г
Other calibration material only suitable for resistance furnace
90710-3010
ЭДТА, 50 г
90824
Сульфаниловая кислота, 50 г
90700-1040
Оксалат кальция, 50 г
Coal, only sulfur certified
92511-3005
Уголь, 50 г, <0.1 % S
92511-3010
Уголь, 50 г, 0.1 – 0.5 % S
92511-3020
Уголь, 50 г, 0.5 – 1.0 % S
92511-3030
Уголь, 50 г, 1.0 – 1.5 % S
92511-3040
Уголь, 50 г, 1.5 – 2.0 % S
92511-3050
Уголь, 50 г, 2.0 – 3.0 % S
92511-3060
Уголь, 50 г, 3.0 – 4.0 % S
92511-3070
Уголь, 50 г, 4.0 – 5.0 % S
92511-3080
Уголь, 50 г, >5.0 % S
Coal, premium, C/H/N/S, ash, volatile content, certified
92550-3010
Уголь, премиум, 50 г, < 1.0 % S
92550-3020
Уголь, премиум, 50 г, > 1 % S
92550-3040
Уголь, премиум, 50 г, 1.0 – 3.0 % S
92550-3060
Уголь, премиум, 50 г, > 3.0 % S
Coke, premium, C/H/N/S, ash, volatile content, certified
92560-3010
Кокс, премиум, 50 г
Pet coke, premium, C/H/N/S, ash, volatile content certified
92570-3020
Pet coke, 50 g, > 1 % S
92570-3040
Уголь, премиум, 50 г, > 1 % S
Liquid calibration material
Calibration materials
Calibration materials may show slight variations depending on the current lot.
To see the current certification please visit www.ELTRA.com.
Oxygen and nitrogen in steel, pins
91100-1001
Сталь, столбики 1 г, 100 штук, 25-40 ppm N
91100-1002
Сталь, столбики 1 г, 100 штук, 30-70 ppm N
91100-1003
Сталь, столбики 1 г, 100 штук, 150-250 ppm N
91100-1005
Сталь, столбики 1 г, 100 штук, 300-600 ppm N
91100-1007
Сталь, столбики 1 г, 100 штук, 70-130 ppm N
91100-1010
Сталь, столбики 1 г, 100 штук, >1000 ppm N
91100-1011
Сталь, столбики 1 г, 100 штук, 600-1000 ppm N
Hydrogen in steel, pins
91400-1001
Сталь, столбики 1 г, 100 штук, 0.5-1 ppm H
91400-1002
Сталь, столбики 1 г, 100 штук, 1.5-4 ppm H
Hydrogen in steel, balls
91110
Steel, 100 balls, gold plated, 1 g each, >1.9 ppm H
Oxygen and sulfur in copper, pins
91000-1003
Медь, столбики 1 г, 100 штук, ~200 ppm O; 10 – 20 ppm S
91000-1004
Медь, столбики 1 г, 100 штук, ~10 ppm O; 10 – 20 ppm S
Oxygen in copper, pins
Oxygen, nitrogen and hydrogen in titanium, pins
91205-1001
Титан, столбики 0,1 г, 100 штук, 10-35 ppm H
91205-1002
Титан, столбики 0,1 г, 100 штук, 20-70 ppm H
91205-1003
Титан, столбики 0,1 г, 100 штук, 30-90 ppm H
91205-1004
Титан, столбики 0,1 г, 100 штук, 60-120 ppm H
91205-1005
Титан, столбики 0,1 г, 100 штук, 150-250 ppm H
91205-1006
Титан, столбики 0,1 г, 100 штук, 120-150 ppm H
Hydrogen and carbon in titanium, pins (250 mg)
91305-1001
Titanium, 100 pins, 0.25 g each, < 50 ppm H
91305-1002
Titanium, 100 pins, 0.25 g each, 50 – 100 ppm H
91305-1003
Titanium, 100 pins, 0.25 g each, > 100 ppm H
Iron powder
91500-1001
Iron powder, ~1 % O2
