Search

Karbon / Kükürt Analizörü ELEMENTRAC CS‑r

Karbon / Kükürt Analizörü ELEMENTRAC CS-r
Fiyat talebi
Veri Sayfası

Dil

For the safe, precise and reliable elemental analysis of carbon (C) and sulfur (S) in predominantly organic matrices such as soils, waste, wood, oil, coal and coke, ELTRA offers the combustion analyzer ELEMENTRAC CS-r with IR detection.

The CS-r with up to 4 infrared cells is designed for carbon and sulfur measurement over a very wide concentration range. It uses a horizontal resistance furnace with ceramic tube, which operates in a range from 600 °C to 1550 °C.

The CS-r elemental analyzer meets or exceeds the requirements of all common ASTM, DIN, EN or ISO standards for elemental analysis. 

Karbon / Kükürt Analizörü ELEMENTRAC CS-r
ELEMENTRAC CS-r: 1. Adım: Örneği ELEMENTS yazılımına kaydetme

1. Adım: Örneği ELEMENTS yazılımına kaydetme

Numune kimliği yazılıma kaydedilir ve ağırlık otomatik olarak aktarılır (bkz. Adım 2).

ELEMENTRAC CS-r: Adım 2: Hızlandırıcıların tartılması ve eklenmesi

Adım 2: Hızlandırıcıların tartılması ve eklenmesi

Volumes of 50 mg to 500 mg are typical for elemental analysis of carbon and sulfur. The sample is directly applied to a carrier (ceramic or Inconel boat) and analyzed without addition of accelerators. 

ELEMENTRAC CS-r: 3. Adım: Analiz

3. Adım: Analiz

The sample is placed in front of the furnace opening and the measurement is started in the software. Subsequently, the shutter opens, and the material can be introduced into the hot furnace. At the same time, the ELEMENTS software continuously records measured values during combustion. Closing the furnace during the measurement is optional and can improve reproducibility.

ELEMENTRAC CS-r: Adım 4: Veri çıkışı ve dışa aktarma

Adım 4: Veri çıkışı ve dışa aktarma

60 to 240 seconds after the analysis has started, the measured carbon and sulfur concentrations are available for export as a report or via LIMS. Depending on the selected configuration, carbon and sulfur values are available for the individual sample.

Karbon / Kükürt Analizörü ELEMENTRAC CS-r Solutions & Options in Detail

The ELEMENTRAC CS-r analyzer comes with various solutions for reliable and precise carbon and sulfur analysis.

Included: Two Anhydrone Columns

For reliable carbon and sulfur analysis, the combustion gases must be freed from water vapor prior to IR detection. The CS-r elemental analyzer is equipped with two drying columns filled with magnesium perchlorate to reliably prevent absorption effects in large sample volumes. In the case of TOC analysis, a chemical tube can also be used as a halogen trap to reliably absorb acid residues and halogens.

ELEMENTRAC CS-r: Included: Two Anhydrone Columns

Included: Low blank sample port

The ELEMENTRAC CS-r and CHS-r analyzer series ensures safe and precise elemental analysis even of samples with low carbon content in the resistance furnace. Due to the optimized geometry of the sample port with reduced diameter, as well as an oxygen purge at the sample inlet, the CO2 blank value of the atmosphere during sample introduction is drastically reduced, thus enabling reliable carbon analysis in the low measuring range.

ELEMENTRAC CS-r: Included: Low blank sample port

Option: Second Furnace (ELTRA Dual Furnace Concept)

The CS-r elemental analyzer can be connected in any configuration to an additional furnace without detectors. This principle, known from the ELEMENTRAC CS-d, allows fast fractionated analysis by applying different temperatures and provides safety for high sample throughput.

ELEMENTRAC CS-r: Option: Second Furnace (ELTRA Dual Furnace Concept)

Option: Monitor Holder

To make the most of available laboratory space, the ELEMENTRAC CS-r analyzer offers various operating options:
  • External monitor and keyboard
  • Monitor holder, wireless keyboard
  • Operation via touchscreen

ELEMENTRAC CS-r: Option: Monitor Holder

Option: TIC Module

Depending on the sample, carbon can also be present in the two different fractions TOC (Total Organic Carbon) or TIC (Total Inorganic Carbon). The CS-r elemental analyzer can be combined with ELTRA's TIC module to determine the TIC content via acidification. This combination enables reliable, direct TIC analysis in soils, building materials and other products in compliance with DIN EN 15936.

ELEMENTRAC CS-r: Option: TIC Module

Kapsamlı Windows tabanlı ELEMENTS yazılımı, tüm ELEMENTRAC nesil element analizörlerinin önemli bir parçasıdır.
Merkezi bir pencere (analiz ve sonuçlar), günlük rutin için gerekli tüm işlevlere kolayca erişilebilen başlangıç noktasıdır. Buradan analiz edilen numuneleri gruplamak ve dışa aktarmak veya yeni numuneleri kaydetmek ve analiz etmek mümkündür. Kullanıcı, uygulama ayarları, kalibrasyon, teşhis veya durum gibi çeşitli alt işlevleri çağırabilir.

 

Karbon / Kükürt Analizörü: ELEMENTS Yazılımı

Karbon / Kükürt Analizörü ELEMENTRAC CS-r Tipik Örnek Malzemeler

biokütle, Yapı malzemeleri, Kömür/Kok, fuels,  Yağ,  Cevher,  Planlama malzemeleri,  Plastik maddeler,  Kauçuk,  Toprak,  Kurum,  Tütün,  Atık, ...

Tipik Örnek Malzemeler: Kömür
Tipik Örnek Malzemeler:  Toprak
Tipik Örnek Malzemeler: plastik granüller

Karbon / Kükürt Analizörü ELEMENTRAC CS-r Fonksiyon prensibi

In the elemental analyzer CS-r the sample is burnt in an oxygen atmosphere at temperatures up to 1,550 °C. The furnace temperature can be freely selected in steps of 1 °C. The combustion gasses (CO2, H2O, SO2) coming from the furnace and pass through a dust filter. After the water vapor is chemically absorbed, the dried CO2 and SO2 gas is detected in the additional infrared cells. Depending on the configuration, it is possible to combine up to four (for C, S analyzers) infrared cells with different sensitivities.

Teknik modifikasyon ve hatalara bağlı olarak